;********************* GSD-Datei for Smart ************************************
;* history                                                                    *
;* ========================================================================== *
;* 14.11.2006 [V1.00]  First Release                                          *
;* 06.02.2007 [V4.00]  different Data Modules added                           *
;* 13.03.2007 [V4.01]  different Data Modules changed                         *
;* 27.03.2007 [V4.02]  bitmap added
;*                     new Vendor_Name
;*                     changed Max_Diag_Data_Len from 18 to 6
;*                     changed Model_Name 
;*                     Modules renamed (PID Select instead of PID Access)
;* 22.06.2007 [V4.03]  Updated Firmware Version to V4.1.44
;*                     no other Changes in GSD
;* 04.10.2007 [V4.04]  new Modules for pressure regulation added
;* 31.10.2007 [V4.05]  new Module 'PWM Signal Wr' added
;* 12.11.2014 [V4.06]  new Modules 'PID pressure' added (kp,ki,kd)
;* 04.03.2015 [V4.07]  Profibus Adress (Rd. Wr)
;* -------------------------------------------------------------------------- *
;*                                                                            *
;******************************************************************************


#Profibus_DP

;==============================================================================
;==== General DP Keywords =====================================================
;==============================================================================

GSD_Revision      = 5
Vendor_Name       = "Voegtlin Instruments AG"
Model_Name        = "Red-Y Smart Series"
Revision          = "4.04"
Ident_Number      = 0x0AAC
Protocol_Ident    = 0
Station_Type      = 0
FMS_supp          = 0
Hardware_Release  = "V4.0.2"
Software_Release  = "V4.1.49"
Redundancy        = 0
Repeater_Ctrl_Sig = 2
24V_Pins          = 0
Bitmap_Device     ="smart"

;==============================================================================
;==== Supported baudrates =====================================================
;==============================================================================

9.6_supp = 1
19.2_supp = 1
45.45_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 1
6M_supp = 1
12M_supp = 1

MaxTsdr_9.6=15
MaxTsdr_19.2=15
MaxTsdr_45.45=15
MaxTsdr_93.75=15
MaxTsdr_187.5=15
MaxTsdr_500=15
MaxTsdr_1.5M=20
MaxTsdr_3M=35
MaxTsdr_6M=50
MaxTsdr_12M=95


;==============================================================================
;==== Slave specific values ===================================================
;==============================================================================


Slave_Family=0@red-y@smart
Implementation_Type = "VPC3+"


Freeze_Mode_supp=0
Sync_Mode_supp=0
Auto_Baud_supp=1
Set_Slave_Add_supp=1
Fail_Safe=1
Min_Slave_Intervall=6

Modular_Station=1
Max_Module=74
Max_Input_Len=244
Max_Output_Len=244
Max_Data_Len=488

Max_Diag_Data_Len=6
Modul_Offset=1


;==============================================================================
;==== User-Prm-Data ===========================================================
;==============================================================================

Max_User_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0)= 0x00,0x00,0x00


;==============================================================================
;==== Module-Definition-List ==================================================
;==============================================================================

Module="Flow Rd            " 0x43,0x83,0x00,0x00,0x00
1
EndModule

Module="Temperature Rd     " 0x43,0x83,0x00,0x00,0x02
2
EndModule

Module="Setpoint Rd        " 0x43,0x83,0x00,0x00,0x06
3
EndModule

Module="Setpoint Wr        " 0x83,0x83,0x00,0x00,0x06
4
EndModule

Module="Analog Input Rd    " 0x43,0x83,0x00,0x00,0x08
5
EndModule

Module="PWM Signal Rd      " 0x43,0x83,0x00,0x00,0x0A
6
EndModule

Module="PWM Signal Wr      " 0x83,0x83,0x00,0x00,0x0A
7
EndModule

Module="Alarm Info Rd      " 0x43,0x81,0x00,0x00,0x0C
8
EndModule

Module="HW Error Rd        " 0x43,0x81,0x00,0x00,0x0D
9
EndModule

Module="Control Mode Rd    " 0x43,0x81,0x00,0x00,0x0E
10
EndModule

Module="Control Mode Wr    " 0x83,0x81,0x00,0x00,0x0E
11
EndModule

Module="SerialNumber Rd    " 0x43,0x83,0x00,0x00,0x1E
12
EndModule

Module="SW Version Rd      " 0x43,0x81,0x00,0x00,0x21
13
EndModule

Module="DeviceTypeCode1 Rd " 0x43,0x87,0x00,0x00,0x23
14
EndModule

Module="PID Access Rd      " 0x43,0x81,0x00,0x00,0x35
15
EndModule

Module="PID Access Wr      " 0x83,0x81,0x00,0x00,0x35
16
EndModule

Module="DeviceTypeCode2 Rd " 0x43,0x87,0x00,0x10,0x04
17
EndModule

Module="HW Error Reset Wr  " 0x83,0x81,0x00,0x40,0x4F
18
EndModule

Module="Lut Select Rd      " 0x43,0x80,0x00,0x41,0x39
19
EndModule

Module="Lut Select Wr      " 0x83,0x80,0x00,0x41,0x39
20
EndModule

Module="Tag Name Rd        " 0x43,0xB1,0x00,0x50,0x00
21
EndModule

Module="Pressure Rd         " 0x43,0x83,0x00,0x5F,0x00
22
EndModule

Module="Setpoint Pressure Rd" 0x43,0x83,0x00,0x5F,0x06
23
EndModule

Module="Setpoint Pressure Wr" 0x83,0x83,0x00,0x5F,0x06
24
EndModule

Module="Unit Pressure Rd    " 0x43,0x87,0x00,0x5F,0x08
25
EndModule

Module="Tag Name Pressure Rd" 0x43,0xB1,0x00,0x5F,0x27
26
EndModule

Module="LUT Access Rd      " 0x43,0x80,0x00,0xDF,0x00
27
EndModule

Module="LUT Access Wr      " 0x83,0x80,0x00,0xDF,0x00
28
EndModule

Module="Flow Range Rd      " 0x43,0x83,0x00,0x60,0x20
29
EndModule

Module="Gasname Rd         " 0x43,0xB1,0x00,0x60,0x22
30
EndModule

Module="Gas Rd             " 0x43,0x87,0x00,0x60,0x42
31
EndModule

Module="FlowUnit Rd        " 0x43,0x87,0x00,0x60,0x46
32
EndModule

Module="Totalisator Rd     " 0x43,0x83,0x00,0x63,0x80
33
EndModule

Module="TotalisatorN Rd    " 0x43,0x83,0x00,0x63,0x82
34
EndModule

Module="TotalisatorUnit Rd " 0x43,0x87,0x00,0x63,0x86
35
EndModule

Module="Kp pressure Rd     " 0x43,0x83,0x00,0x5F,0x20
36
EndModule

Module="Ki pressure Rd     " 0x43,0x83,0x00,0x5F,0x22
37
EndModule

Module="Kd pressure Rd     " 0x43,0x83,0x00,0x5F,0x24
38
EndModule

Module="Profibus Adress Rd " 0x43,0x80,0x00,0x59,0x00
39
EndModule
 
Module="Profibus Adress Wr " 0x83,0x80,0x00,0x59,0x00
40
EndModule



;==============================================================================
;==== DPV1 KEY WORDS ==========================================================
;==============================================================================

DPV1_Slave                               = 1
C1_Read_Write_supp                  = 1

C1_Max_Data_Len                     = 240       ;The parameter specifies the maximum length of user data excluding
                                                ;Function_Num, Slot_number, Index, Length, transferred on the
                                                ;MSAC_1 communication channel.
                                                ;Type: Unsigned8 (0 .. 240)
C1_Response_Timeout               = 300
Diagnostic_Alarm_supp               = 0
Process_Alarm_supp                  = 0
Alarm_Type_Mode_supp             = 0
WD_Base_1ms_supp                 = 1


C2_Read_Write_supp=1
C2_Max_Data_Len                     = 240       ;The parameter specifies the maximum length of user data excluding
                                                ;Function_Num, Slot_number, Index, Length, transferred on the
                                                ;MSAC_2 communication channel.
                                                ;Type: Unsigned8 (0,48 .. 240)
C2_Response_Timeout                 = 300
C2_Max_Count_Channels=3
Max_Initiate_PDU_Length=244                     ;The parameter specifies the maximum length of an Initiate Request
                                                ;PDU including the Function_Num to the Resource Manager.
                                                ;Type: Unsigned8 (0,52.. 244)
DPV1_Data_Types                     = 0

Ident_Maintenance_supp              =1         ;I&M fuctions supported